Rust-inhibiting penetrating primer for overcoating with any paint.
Description
Rustol CIP (Corrosive Inhibiting Primer) is an anti-corrosive that can be covered with different types of coatings.
Properties :
- Universal undercoat before all types of paint without risk of distemper or poor adhesion of subsequent coats (except xylene paints).
- Applies to new or oxidized substrates indoors and outdoors.
- Lasting action by penetration and passivation of the support; perfect insulation from sound metal, exceptional adhesion.
- Reinforced protection thanks to active pigments and perfect film-forming qualities.
- Easy to use, does not require prior sanding of the support.
- Temperature resistance up to + 175°C.
- Yield: 15 m²/l – The practical yield varies according to the type, the state of surface.
Substrate preparation:
The substrate must be degreased and free of any brushing/sanding residue before applying Rustol CIP.
- Oxidized Support:Â Rustol CIP uses sound, non-friable rust for optimum adhesion.
- Remove crumbly rust by simple brushing.
- Degrease using a non-oxidizing solvent such as White-Spirit, acetone.
- New, non-oxidized support:Â It is absolutely necessary to prepare the support meticulously (degreasing with white-Spirit or acetone + sanding grit 60-120).
Applications:
- Interior Exterior
- Rustol CIP is recommended in all cases of severe ambient conditions: maritime or tropical climates, corrosive vapours, protection of motor vehicles, public works equipment and boat ballasts which it effectively protects.
- Rustol CIP is especially recommended as an undercoat when two-component paints or paints with high solvent power (urethanes, epoxies, chlorinated rubber, synthetic bodywork, etc.) are used as an overlay.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.